LUM Ultrafine Vertical Mill

Technical Advantages

High Efficiency &High Quality of Finished Products

滚子壳和衬板的研磨曲线基于超细粉碎原理设计，使得更容易形成材料床，从初级研磨中提高研磨效率并增加成品的比例。
The special pre-compaction device ensures grinding efficiency and fineness of finished products. Besides, small vibration of the mill decreases energy loss.
According to the material bed pulverization principle, the materials stay a short time in the mill to reduce the repeated grinding. . As a result, the iron content in the finished products is low and the whiteness and purity of the product are high .

先进的分离技术和能源效率

The principle of multi-rotor powder classifiers is adopted, so the finished product fineness can be customized as selected range , with no low-grade material in existence.
By adopting PLC control system, major parameters like grinding pressure, rotating speed of grinding disc and speed of classifier etc. can be accurately controlled to achieve accurate cutting size and stable quality.
Thanks to the use of ultrafine pulverization and multi-rotor separation, LUM series ultrafine vertical grinding mill saves energy by 30% to 50% compared to a common type mill when producing the powder of the same fineness, which achieves better economic effects.

智能控制系统和稳定运行

The control mode for pressure adjustment of grinding roller adopts PLC/DCS automatic control system, which ensures the accurate control of grinding pressure, high efficiency and stable operation.
Automatic control system enables remote control and simple operation.
Frequency-conversion speed regulation enables the mill to be used for materials of a wide range of hardness.

Environmentally-friendly

轧机的特殊结构设计和操作原理确保小振动和低噪音。
整个设备密封良好，系统在负压下运行。因此，防止粉末和灰尘从系统流出。它是环保的，符合国家环保要求。

Working principle

The materials drop on the grinding plate center through the screw feeder and evenly move outwards under the action of centrifugal force of the rotating grinding plate driven by the reducer; Large materials are crushed and ground by the grinding rollers when passing through the grinding area, while smaller materials form a material bed by extrusion for further inter granular crushing. The crushed materials continue to move towards the mill edge until being taken into the classifier by the air flow from the air inlet. The powder particles failing to meet the particle size requirement fall back on the grinding plate for further grinding while the qualified powder particles are collected in the pulse dust collector with the air flow and discharged as finished products. However, the iron blocks and other sundries mixed in the materials move along with the materials towards the edge of the grinding plate due to their own weight. They fall into the lower chamber of the mill and then be discharged out of the mill through the slag discharge opening by the scraping plate.

Tech Data

Model	lum1125					LUM1232					LUM1436
主机电源（kW）	220〜250					280~315					355〜400
Power concentrator power(Kw)	1x75/6x15					1x110 / 7x15					1x132 / 8x18.5
Fan power(Kw)	160~200					220〜250					315~355
Capacity(t/h)	10.5〜11.5	8~9	6~7	4〜4.5	3~3.5	12.5〜13.5	11.5~12.5	8.5 ~ 9.5	5.5~6.5	4~5	14〜15	12~13	11~12	7.5〜8.5	5.5~6.5
325 mesh residue on sieve(%)	0.015	0.015	0.01	0	0	0.015	0.015	0.01	0	0	0.015	0.015	0.01	0	0
Content >2μm(%)	34±2	40±2	45±2	50±2	60±2	34±2	40±2	45±2	50±2	60±2	34±2	40±2	45±2	50±2	60±2
平均分子尺寸D50（μm）	4.2±0.5	3.0±0.4	2.4±0.2	1.8±0.2	1.4±0.1	4.5	3.5	2.8	2.0	1.5	4.5	3.5	2.8	2.0	1.5
Size distribution D97(μm)	30	20	15	10	8	25	20	15	10	8	25	20	15	10	8
Compact apparent specific gravity(g/cm³)	1.18	1.06	0.90	0.85	0.76	1.18	1.06	0.90	0.85	0.76	1.18	1.06	0.90	0.85	0.76
Loose apparent specific gravity(g/cm³)	0.45	0.40	0.34	0.32	0.28	0.45	0.40	0.34	0.32	0.28	0.45	0.40	0.34	0.32	0.28
Moisture content(%)	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3	Below 0.3